Power

输入电源

Power rated: 4.2KW(380±10%V)

额定功率：4.2KW(380±10%V)

Voltage

电压

Voltage rated: AC 380±10%V 50/60Hz

额定电压：AC 380±10%V 50/60Hz

Working Temperature

工作温度

Max. Temperature: 1200℃

额定温度：1200℃

Continuous working temperature: ≤1000℃

持续工作温度：≤1000℃

RecommendedHeating Rate: 15°C /min

推荐升温速率：15℃/分

外观

Surface

主体白色

Mainly white

Temperature Controller

控温方式

PID automatic control andauto-tune function.

模糊PID控制和自整定调节

30 programmable segments for precise thermal processing.

智能化30段可编程控制

Built-in protection for the over-heated and broken thermocouple.

超温和断偶报警功能

Thermocouple

热电偶

K type

K型

Heating Elements

加热元件

Fe-Cr-Al Alloy doped by Mo

电阻丝（掺钼铁铬铝合金）

Temperature Accuracy

控温精度

+/- 1℃

Dimensions

尺寸

Chamber size(L*D*H): 250x300x250mm(18L)

腔体尺寸(长*深*高)：250x300x250mm(18L)

Furnace size(L*W*H): 620x610x1070mm

电炉尺寸(长*宽*高)：620x610x1070mm

Cold ultimate vacuum

冷态极限真空

≤100Pa

Warranty

质保

One year limited warranty with lifetime support (Such consumable parts as processing tubes, and O-rings are NOTsupportedby the warranty)

一年质保终身支持（消耗品如O型圈不在质保范围内）

Attention

注意事项

The equipment is not sealed, and can not be put into toxic, harmful, inflammable and explosive gas. Can add the inlet port to pass through the inert gas or oxygen.

此设备腔体不密封，不能通入有毒有害，易燃易爆气体。可以加装进气接头，通惰性气体或者氧气

Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired withalumina coating.

在使用过程中炉膛表面可能出现细小裂纹。这是正常情况，裂纹可以用氧化铝涂层修复。

You shall place the sample in to a crucible. Never place sample on the chamber bottom directly.

应该把样品放进坩埚里。不要把样品直接放在腔底。

Compliance

认证

CE Certified

CE认证

All electric components ( >24V) are UL / MET / CSAcertified

所有电气部件( >24V)都有UL / MET / CSA认证

The furnace is ready topass TUV(UL61010) or CSAcertification at extra cost.

可付费进行TUV(UL61010)或CSA认证

Operation instructions

操作指导

the operating manual

参考说明书