SGM 箱式高温炉是由洛阳西格马高温电炉生产的高温箱式电阻炉、箱式高温电阻炉。洛阳西格马高温电炉可生产箱式气氛炉、气氛箱式炉、箱式加热炉、箱式热处理炉、热处理箱式炉、箱式实验炉、实验箱式炉。

SGM box type high temperature furnace is a high temperature box type resistance furnace and a box type high temperature resistance furnace produced by Luoyang sigma high temperature electric furnace. Luoyang sigma high temperature electric furnace can produce box type atmosphere furnace, atmosphere box type furnace, box type heating furnace, box type heat treatment furnace, heat treatment box type furnace and box type experimental furnace、Laboratory box furnace.

箱式炉引进先进技术，具有节能、环保、结构合理、性能异等特点。炉体为双层壳体，经精致喷塑耐腐蚀耐酸碱，炉体与炉膛隔离采用风冷，壳体表面的温度小于60度。高温箱式炉炉膛采用纤维制作而成，耐高温、耐急热急冷，保温性能好。

The box furnace is characterized by energy saving, environmental protection, reasonable structure and excellent performance. The furnace body is a double-layer shell, which is corrosion-resistant and acid-base resistant after exquisite plastic spraying. The furnace body is separated from the furnace by air cooling, and the surface temperature of the shell is less than 60 ℃. The furnace of high temperature box furnace is made of imported fiber, which is resistant to high temperature, rapid heating and cooling, and has good heat preservation performance.

sigma 1600℃箱式高温炉

高温箱式炉主要特点：

The main features of high temperature box furnace are as follows

高温箱式炉操作方便，可编程，PID自整定、自动升温、自动保温、 自动降温，无需值守；可另配与计算机通讯通过计算机操作电炉（启动电炉、停止电炉、暂停升温、设定升温曲线、升温曲线储存、历史曲线等。

High temperature box furnace is easy to operate, programmable, PID self-tuning, automatic heating, automatic insulation, automatic cooling, no need to be on duty; can be equipped with computer communication, through the computer operation of the furnace (start furnace, stop furnace, pause heating, set temperature rise curve, temperature rise curve storage, historical curve, etc.).

双层炉壳，炉体经精致喷塑耐腐蚀耐酸碱，炉体与炉膛隔离采用风冷，壳体表面的温度小于60度。

Double layer furnace shell, the furnace body by fine spray plastic corrosion resistance, acid and alkali resistance, furnace body and furnace isolation using air cooling, shell surface temperature is less than 60 degrees.

节能：炉膛材料为（炉膛采用纤维制作而成，耐高温、耐急热急冷，保温性能好）。

Energy saving: furnace material is (furnace is made of imported fiber, high temperature resistance, rapid heat and cooling resistance, good insulation performance).

升温快（升温速率1℃/h至40℃/min可调）。

The heating rate is adjustable from 1 ℃ / h to 40 ℃ / min.

双回路保护（超温、超压、超流、段偶、断电等）。

Double circuit protection (over temperature, over pressure, over current, section couple, power failure, etc.).

静音电子继电器。

Silent electronic relay.

标准配置数字式PID控制器，可调节升温曲线、保温温度和保温时间。

The standard configuration digital PID controller can adjust the heating curve, holding temperature and holding time.

超温报警并断电，漏电保护，操作安全可靠。

Over temperature alarm and power off, leakage protection, safe and reliable operation.

侧开式炉门，易于样品装载，并可加装通气口，可在氧气或惰性气氛下操作壳体结构两侧（或四面）加热确保高度均匀的温度分布（保护气操作作为额外配置）。

The side opening furnace door is easy for sample loading and can be equipped with ventilation port. It can be operated in oxygen or inert atmosphere to heat both sides (or four sides) of the shell structure to ensure a highly uniform temperature distribution (protective gas operation as an additional configuration).

常用型号

注：以上所列出型号都有现货，特殊型号炉膛尺寸可根据客户要求定做，定做周期为7-30个工作日。

需要了解箱式炉价格、箱式炉型号、箱式炉说明书，可联系客户。

高温箱式炉操作方便，可编程，PID自整定、自动升温、自动保温、 自动降温，无需值守;可另配与计算机通讯通过计算机操作电炉(启动电炉、停止电炉、暂停升温、设定升温曲线、升温曲线储存、历史曲线等）

High temperature box furnace is easy to operate, programmable, PID self-tuning, automatic heating, automatic heat preservation, automatic cooling, no need to be on duty; it can also be equipped with computer communication to operate the electric furnace through computer (start furnace, stop electric furnace, pause temperature rise, set temperature rise curve, temperature rise curve storage, historical curve, etc.)

双层炉壳，炉体经精致喷塑耐腐蚀耐酸碱，炉体与炉膛隔离采用风冷，壳体表面的温度小于60度

Double layer furnace shell, the furnace body by fine spray plastic corrosion resistance, acid and alkali resistance, furnace body and furnace isolation using air cooling, shell surface temperature is less than 60 degrees

节能：炉膛材料为炉膛采用三菱纤维制作而成，耐高温、耐急热急冷，保温性能好（可定制JM轻质砖、氧化铝空心球炉膛）

Energy saving: the furnace material is made of imported Mitsubishi fiber, with high temperature resistance, rapid heat and cooling resistance, and good thermal insulation performance (JM lightweight brick and alumina hollow ball furnace can be customized)

升温快(升温速率1℃/h至20℃/min可调,更高升温速率可定制)

Fast heating (the heating rate can be adjusted from 1 ℃ / h to 20 ℃ / min, and the higher heating rate can be customized)

双回路保护(超温、超压、超流、断偶、断电等)

Double circuit protection (over temperature, over pressure, over current, broken couple, power off, etc.)

SCR可控硅调压

SCR SCR voltage regulation

标准配置数字式PID控制器，可调节升温曲线、保温温度和保温时间

Standard configuration of digital PID controller, adjustable heating curve, holding temperature and holding time

超温报警并断电，漏电保护，操作安全可靠

Over temperature alarm and power off, leakage protection, safe and reliable operation

炉底和炉门一体化，电动进出，易于样品装载

Integration of furnace bottom and furnace door, electric in and out, easy sample loading

联系箱式高温炉\箱式高温电阻炉厂家电话，沟通箱式高温炉\箱式高温电阻炉详细参数和箱式高温炉\箱式高温电阻炉价格